Continuous Lithium Extraction System Using Ion-Selective Membrane for Extraction of High-Purity Lithium Phosphate Powder

Seung-Hwan Lee, So Hyun Baek, Jeungjai Yun, Hyun-Woo Lee, Yongbum Kwon, Kee-Ryung Park, Yoseb Song, Bum Sung Kim, Yong-Ho Choa, Da-Woon Jeong
Journal of the Japan Society of Powder and Powder Metallurgy , 72 , S753-S756

Development of Evaporation-driven Energy Harvesting Device Applying Electrospun Nanofiber Mat with Carbon Black Powders

Yongbum KWON, Dai BUI-VINH, Seung-Hwan LEE, So Hyun BAEK, Jeungjai YUN, Hyun-Woo LEE, Handol LEE and Da-Woon JEONG
Journal of the Japan Society of Powder and Powder Metallurgy , 72 , S1601-S1604

Synergistic effects of embedded Ag nanoparticles and surface SiO2 layers on recycled silicon anodes for high performance lithium-ion batteries

Hyeonmin Yim†, Kee-Ryung Park†, Borim Shim, Seung-Hwan Oh, Bum Sung Kim, Woo-Byoung Kim
Chemical Engineering Journal , 504 , 15

Pyrometallurgical eco-recycling for Zn and MnO recovery from spent alkaline and Zn–C batteries

Seoung Uk Bae, Joo Hyun Park, Kyoung-Tae Park, Jae Hong Shin
Journal of Material Cycles and Waste Management , 27 , 572-583

Advanced nanostructuring and gradient phosphorus doping enhance p-Si photocathode performance for photoelectrochemical water splitting

Dong Hyeok Seo‡, Kee-Ryung Park‡, Woo-Byoung Kim
Journal of Materials Chemistry A , 12 , 6028-6037

Development of low-temperature SnO2–Au gas sensors for H2S detection in food freshness monitoring

Kee-Ryung Park, Jinhyeong Kwon, Hyeunseok Choi
Journal of Materials Chemistry C , 12 , 15895-15902

A New Paradigm on Waste-to-Energy Applying Hydrovoltaic Energy Harvesting Technology to Face Masks

Yongbum Kwon, DaiBui-Vinh, Seung-Hwan Lee, So Hyun Baek, Hyun-Woo Lee, Jeungjai Yun, Inhee Cho, Jeonghoon Lee, Mi Hye Lee, Handol Lee* and Da-WoonJeong*
Polymers , 16 , 2515

Real-time analysis and prediction method of ion concentration using the effect of O-H stretching bands in aqueous solutions based on FTIR-ATR spectroscopy

So Hyun Baek†, Jeungjai Yun†, Seung-Hwan Lee, Hyun-Woo Lee, Yongbum Kwon, Kee-Ryung Park, Yoseb Song, Bum Sung Kim, Rhokyun Kwak, Haejin Hwang, Da-Woon Jeong*
RSC Advances , 14 , 20073

A novel water electrolysis hydrogen production system powered by a renewable hydrovoltaic power generator

Seung-Hwan Lee†, Yongbum Kwon†, Sungsoon Kim†, JeungJai Yun, Eugene Kim, Gyuyong Jang, Yoseb Song, Bum Sung Kim, Yong-Ho Choa, Chang-Suk Oh, Jae-Yup Kim*, Jong Hyeok Park* and Da-Woon Jeong*
Chemical Engineering Journal , 27 , 153411

Cost-Effective Moisture-Induced Electrical Power Generators for Sustainable Electrodialysis Desalination

Seung-Hwan Lee†, Jae-Yup Kim†, Joonhyeon Kim, Jeungjai Yun, Jiyoon Youm, Yongbum Kwon, Min-Su Kim, Bum Sung Kim, Yong-Ho Choa, Inhee Cho *, Rhokyun Kwak*, and Da-Woon Jeong*
Nano Energy , 126 , 109683

Insights into the development of Fe modified Ti-Nb alloy: A powder metallurgy perspective

Muhammad Aneeq Haq, Ijaz Ali, Yoseb Song, Bum Sung Kim
materialstoday COMMUNICATIONS , 38 , 107743

Designing L21-Co2TiAl precipitate-strengthened ferritic alloys with excellent high-temperature mechanical properties

Jeongeun Kim, Kanghyun Park, Soon Jik Hong, Sung Hwan Hong, Ki Buem Kim, Junhee Han, Chanho Lee*, Gian Song*
Materials Science and Engineering: A , 891 , 145984

Evaporation-driven Energy Generations Through the Electro-spun Polyacrylonitrile Nanofiber Mat with Different Support Substrates

Yongbum Kwon, Dai Bui-Vinh, Seung-Hwan Lee, So Hyun Baek, Songhui Lee, Jeungjai Yun, Minwoo Baek, Hyun-Woo Lee, Jaebeom Park, Miri Kim, Minsang Yoo, Bum Sung Kim, Yoseb Song, Handol Lee, Do-Hyun Lee* and Da-Woon Jeong*
Polymers , 16(9) , 1180

Hydrovoltaic electricity generator using a hierarchical NiFe LDH-coated CuO nanowire mesh device

Ji Young Park, Yeonsu Kwak, Ji-Eun Lee, Young-Deuk Kim, Seung-Hwan Lee, Da-Woon Jeong, Bum-Sung Kim, Yong-Ho Choa*
Chemical Engineering Journal , 485 , 149914

희소금속 리튬의 소재 공급망 현황 및 연구 동향

백소현, 이현우, 이승환, 윤정재, 권용범, 조인희, 송요셉, 김범성, 황해진, 정다운
뿌리기술산업 , 2(1) , 45-52

Water-Based Generators with Cellulose Acetate: Uncovering the Mechanisms of Power Generation

Seung-Hwan Lee, Hyun-Woo Lee, So Hyun Baek, Jeungjai Yun, Yongbum Kwon, Yoseb Song, Bum Sung Kim, Yong-Ho Choa and Da-Woon Jeong
Polymers , 16(3) , 433

Residual Stress Analysis of Additive Manufactured A356.2 Aluminum Alloys using X-Ray Diffraction Methods

SangCheol Park†, InYeong Kim†, Young Il Kim, Dae-Kyeom Kim , Soong Ju Oh , Kee-Ahn Lee , and Bin Lee*
대한금속재료학회지 , 61 , 534-544

Surface residual stress analysis of additive manufactured AlSi10Mg alloys

InYeong Kim , Sang Cheol Park , Young Il Kim , Dae-Kyeom Kim , Kee-Ahn Lee , Soong Ju Oh , Bin Lee*
Journal of Alloys and Compounds , 945 , 169315

Study on Reaction Behavior of Mg-FeB Phase for Rare Earth Elements Recovery from End-of-life Magnet

Sangmin Park†, Dae-Kyeom Kim†, Rongyu Liu , Jaeyun Jeong , Taek-Soo Kim and Myungsuk Song *
한국분말야금학회지 , 30 , 101-106

Experimental and Computational Study of Optimized Gas Diffusion Layer for Polymer Electrolyte Membrane Electrolyzer

Javid Hussain†, Dae-Kyeom Kim†, Sangmin Park, Muhammad Waqas Khalid, Sayed-Sajid Hussain, Ammad Ali, Bin Lee, Myungsuk Song* and Taek-Soo Kim*
Materials , 16 , 4554

Separation and recovery Nd and Dy from Mg-REEs alloy by vacuum distillation

Sangmin Park , Dae-Kyeom Kim , Jaeyun Jeong , Jae Hong Shin , Yujin Kang , Rongyu Liu , Taek-Soo Kim* ,and Myungsuk Song *
Journal of Alloys and Compounds , 967 , 171775

Versatile synthesis of 1-D akaganeite nanoparticles with fine-tuned exchange biasing and weak ferromagnetic effect

Hessan Khalid, Sung Gue Heo, Mi Hye Lee, Kyoung-Tae Park, Soong Ju Oh, Seok-Jun Seo *
Journal of Alloys and Compounds , 962 , 1-8

Kinetic study of electrochemical deoxidation of commercially pure titanium in molten magnesium chloride

UiJun Ko, Hamid Reza Javadinejad, Kyoung-Tae Park, Namhun Kwon & Jeoung Han Kim
JOURNAL OF MATERIALS SCIENCE , (2023) 58 , 11235-11251

Effects of reduction temperature and diluent content on the properties of high-purity tantalum powder prepared using the Hunter process

YongKwan Lee, HyunChul Kim, Namhun Kwon, JaeJin Sim, MiHye Lee, SoongJu Oh, SeokJun Seo, JaeHong Shin, Kyoungtae Park
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS , 112 (2023) , 106128

Machine learning for additive manufacturing: Predicting materials characteristics and their uncertainty

Dmitry Chernyavsky, Denys Y Kononenko, Jun Hee Han, Hwi Jun Kim, Jeroen van den Brink, Konrad Kosiba
Materials & Design , 227 , 111699

Maximizing vitrification and density of a Zr-based glass-forming alloy processed by laser powder bed fusion

Konrad Kosiba*, Denys Y Kononenko*, Dmitry Chernyavsky, Liang Deng, Jozef Bednarcik, Junhee Han, Jeroen van den Brink, Hwi Jun Kim, Sergio Scudino
Journal of Alloys and Compounds , 940 , 168946

Strain fields as local probe for X-ray diffraction tomography: Non-destructive reconstruction of shear band paths in metallic glasses

Sergio Scudino*, Junhee Han, Rub Nawaz Shahid, Dina Bieberstein, Thomas Gemming, Jon Wright
Journal of Alloys and Compounds , 958 , 170484

Experimental cooling rates during high-power laser powder bed fusion at varying processing conditions

Konrad Kosiba*, Tobias Gustmann, Jong Tae Kim, Jinwoo Seok, Juree Jung, Lukas Beyer, Sergio Scudino, Lars Giebeler, Junhee Han, Julia K Hufenbach
Journal of Alloys and Compounds , 967 , 171773

Roles of Sc and Ag Microalloying Elements in the Mechanical Properties of Al-Zn-Mg-Cu (Al7xxx) Alloy

Sung-Jae Won, Hyeongsub So, Jung-Woo Han, Soong Ju Oh and Kyou-Hyun Kim
metals , 13 , 244

Effects of Sc and Be Microalloying Elements on Mechanical Properties of Al-Zn-Mg-Cu (Al7xxx) Alloy

Sung-Jae Won, Hyeongsub So, Jung-Woo Han, Soong Ju Oh, Leeseung Kang and Kyou-Hyun Kim
metals , 13 , 340

Porous Material (Titanium Gas Diffusion Layer) in Proton Exchange Membrane Fuel Cell/Electrolyzer: Fabrication Methods & GeoDict: A Critical Review

Javid Hussain†, Dae-Kyeom Kim†, Sangmin Park, Muhammad-Waqas Khalid, Sayed-Sajid Hussain, Bin Lee, Myungsuk Song* and Taek-Soo Kim*
Materials , 16 , 4515

Highly increased hydrovoltaic power generation via surfactant optimization of carbon black solution for cellulose microfiber cylindrical generator

Jiyoon Youm†, Seung-Hwan Lee†, Inhee Cho, Da-Woon Jeong*, Junghwan Bang, Hyung-Ho Park*, Min-Su Kim*
Surfaces and Interfaces(2023) , 38 , 102853

생체모방 모세관 현상을 이용한 PDMS 구조체 기반 증산발전기 제조기술 연구

이승환, 윤정재, 백소현, 권용범, 송요셉, 김범성, 좌용호, 정다운*
한국분말야금학회지 , 30 , 268-275

분말 합성법 (Sol-Gel & Solid-State reaction) 에 따른 Lithium Lanthanum Titanate 분말의 입자 및 결정 크기 비교 분석에 관한 연구

윤정재, 이승환, 백소현, 권용범, 송요셉, 김범성, 이빈, 곽노균, 정다운*
한국분말야금학회지(2023) , 30(4) , 324-331

Optimization of a Solution Treatment in the Al-Cu-Mg-Ag Alloy via a Microstructural Investigation

Hyeongsub So, Jae-Hong Shin, Leeseung Kang, Chanuk Jeong and Kyou-Hyun Kim
metals , 12 , 66

Control of Grain Refinement and Anisotropy of NdFeB Alloy Powder by Severe Plastic Deformation Fabricated by the Gas Atomization Process

J. Y. Cho† , Sangmin Park† , J. Hussain , Myung-Suk Song , Taek-Soo Kim*
소성· 가공 , 31 , 124-128

Investigation of Factors for Smartization of Ppuri Enterprises Based on the Smart Factory Status

Bo Kyung Kim, Sang Mok Lee, Tae Bum Kim, Taek Soo Kim, Chang Kyung Kim*
한국분말야금학회지 , 29 , 166-175

The Supported Boro-Additive Effect for the Selective Recovery of Dy Elements from Rare-Earth-Elements-Based Magnets

Sangmin Park ,Dae-Kyeom Kim ,Javid Hussain ,Myungsuk Song *,† andTaek-Soo Kim *,†
Materials , 15 , 3032

Methyltrichlorosilane 표면 처리를 통한 적층 제조용 AlSi10Mg 분말의 유동 특성 향상 공정 연구

박상철†, 김인영†, 김영일, 김대겸*, 이기안, 오승주, 이 빈*
한국분말재료학회지 , 29 , 363-369

ISO TC 298에서의 희토류 재활용 관련 국제 표준화 현황

이미혜✝, 송요셉✝, 온지선, 윤승환, 한문환, 김범성, 김택수, 이빈*
한국분말야금학회지 , 29 , 159-165

Enhancing spreadability of hydrogenation-dehydrogenation titanium powder and novel method to characterize powder spreadability for powder bed fusion additive manufacturing

Young Il Kim, Dae-Kyeom Kim, InYeong Kim, Sang Cheol Park, Dongju Lee*, Bin Lee*
Materials & Design , 223 , 111247

Nd2Fe14B/FeCo Core–Shell Nanoparticle Synthesis Using Galvanic Substitution Based Electroless Plating

Muhammad Aneeq Haq ,Han-Saem Lee, Mi Hye Lee ,Da-Woon Jeong, Eom Nu Si, Bin Lee, Yoseb Song and Bum Sung Kim
Coatings , 12(3) , 389

Diffusion kinetics and elemental transport in selective surface nitriding of CoCrFeNiTi0.5 high entropy powder

Muhammad Aneeq Haq , Yoseb Song , Ammad Ali , Javid Hussain , On Ji Sun, Da-Woon Jeong , Jeong Gon Kim , Bum Sung Kim
Journal of Alloys and Compounds , 905 , 164174

Preparation and Refinement Behavior of (Hf-Ti-Ta-Zr-Nb) C High-Entropy Carbide Powders by Ultra High Energy Ball Milling Process

Junwoo Song, Junhee Han, Song-Yi Kim, Jinwoo Seok, Hyoseop Kim*
Journal of Powder Materials , 29 , 1

Evaluation of dislocation activities and accumulation in cold swaged CoCrFeMnNi high entropy alloy

Pramote Thirathipviwat*, Yusuke Onuki, Gian Song, Junhee Han, Shigeo Sato
Journal of Alloys and Compounds , 890 , 161816

A role of atomic size misfit in lattice distortion and solid solution strengthening of TiNbHfTaZr high entropy alloy system

Pramote Thirathipviwat*, Shigeo Sato, Gian Song, Jozef Bednarcik, Kornelius Nielsch, Juree Jung, Junhee Han*
Scripta Materialia , 210 , 114470

러시아 기술협력 수요조사를 통한 한-러 산업기술 협력의 새로운 방향 고찰: 연구논문 리뷰와 9개다리 정책을 중심으로

권용범, 조인희
한국산학기술학회 , 2022.8 , 257 - 267 (11page)

Diffusion kinetics and elemental transport in selective surface nitriding of CoCrFeNiTi0. 5 high entropy powder

Muhammad Aneeq Haq, Yoseb Song, Ammad Ali, Javid Hussain, On Ji Sun, Da-Woon Jeong, Jeong Gon Kim, Bum Sung Kim
Journal of Alloys and Compounds , 905 , 164174

Designing co-reinforced in-situ (Cr3C2 (w)+ Cr2O3 (p))/CoCrFeNi composite with excellent strengthening efficiency

Muhammad Aneeq Haq, Yoseb Song, Muhammad Waqas Khalid, Da-Woon Jeong, Kyoung-Tae Park, Jeong Gon Kim, Mi Hye Lee, Bum Sung Kim
Materials Science and Engineering: A , 832 , 142365

Consideration of Diluents Selection and Input Amounts of the Hunter Process for Tantalum Production

Jae‑Jin Sim, Sang‑Hoon Choi, Yong‑Kwan Lee, Sung Gue Heo, Taek‑Soo Kim, Seok‑Jun Seo, Kyoung‑Tae Park*
METALS AND MATERIALS INTERNATIONAL , 27 , 7

Phase Evolution During Extraction and Recovery of Pure Nd from Magnet

Mohammad Zarar Rasheed, Sun-Woo Nam, Sang-Hoon Lee, Sang-Min Park, Ju-Young Cho, Taek-Soo Kim*
Archives of Metallurgy and Materials , 66 , 1001-1005

Improving spreadability of hydrogenation–dehydrogenation Ti powder via surface treatment using silane-based compounds

Young Il Kim✝, Dae-Kyeom Kim✝, Dongju Lee, Taek-Soo Kim, Young Do Kim, Bin Lee*
Applied Surface Science , 556 , 149645

Enhanced cooling channel efficiency of high-pressure die-casting molds with pure copper linings in cooling channels via explosive bonding

Sang-Soo Shin, Sang-Kee Lee, Dae-Kyeom Kim, Bin Lee*
Journal of Materials Processing Technology , 297 , 117235

Review of the Liquid Metal Extraction Process for the Recovery of Nd and Dy from Permanent Magnets

Mohammad Zarar Rasheed, Sun-Woo Nam, Ju-Young Cho, Kyoung-Tae Park, Bum-Sung Kim & Taek-Soo Kim*
Metallurgical and Materials Transactions B , 52 , 1213-1227

Effect of Oxidation Behavior of (Nd, Dy)-Fe-B Magnet on Heavy Rare Earth Extraction Process

Sangmin Park, Sun-Woo Nam, Sang-Hoon Lee, Myung-Suk Song and Taek-Soo Kim*
Journal of Powder Materials , 28 , 91-96

Rare Earth Magnet Recycling and Materialization for a Circular Economy—A Korean Perspective

Mohammad Zarar Rasheed †,Myung-suk Song †,Sang-min Park ,Sun-woo Nam ,Javid Hussain , andTaek-Soo Kim *
Applied Sciences , 11 , 6739

Comparison of physical properties of Ta-Cu-X contact materials with mixing of additives

Sung Gue Heo, Yeong-Woo Cho, Yong-Tak Lee, Jae-Jin Sim, Taek-Soo Kim, Soong Ju Oh, Seok-Jun Seo*, Kyoung-Tae Park*
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS , 101 , 105670

Comparative study for microstructural characterisations and properties of Ti-Y powders produced by vacuum induction gas atomization cold crucible process

Dae-Kyeom Kim, Young Il Kim, Young Do Kim, Dongju Lee, Bin Lee* &Taek-Soo Kim*
Powder Metallurgy , 64 , 396-403

An in-situ approach for fabricating network reinforced CoCrFeNi matrix composite

Production of HigH-Purity tantalum metal Powder for caPacitors using self-ProPagating HigH-temPerature syntHesis

Yong-Kwan Lee, Jae-Jin Sim, Jong-Soo Byeon, Yong-Tak Lee, Yeong-Woo Cho, Hyun-Chul Kim, Sung-Gue Heo, Kee-Ahn Lee, Seok-Jun Seo *, Kyoung-Tae Park *
ARCHIVES OF METALLURGY AND MATERIALS , 66 , 935-939

Thickness control of TiN network in CoCrFeNi matrix composite with tunable microstructure

Muhammad Aneeq Haq, Hansaem Lee, Yoseb Song , Da-Woon Jeong , Bum Sung Kim
Applied Surface Science , 543 , 148761

Effective Deoxidation Process of Titanium Scrap Using MgCl2 Molten Salt Electrolytic

Namhun Kwon, Jong-Soo Byeon, Hyun Chul Kim, Sung Gue Heo, Soong Ju Oh, Sang-hoon Choi, Seok-Jun Seo *. Kyoung-Tae Park *
METALS , 11 , 1811-1 - 1911-14

Effects of ZrO2 and Al2O3 Addition on the Physical Properties of Cu-Mo-Cr Alloy by Liquid Phase Sintering

Yeong-Woo Cho, Jae-Jin Sim, Sung-Gue Heo, Hyun-Chul Kim, Yong-Kwan Lee, Jong-Soo Byeon, Yong-Tak Lee, Kee-Ahn Lee, Seok-Jun Seo *, Kyoung-Tae Park *
ARCHIVES OF METALLURGY AND MATERIALS , 66 , 683-687

Comparative Study of the Properties of Cu-Cr-Mo System Electrical Contact Material by Sintering and Infiltration Methods

AlN nucleation and spontaneous pattern formation via combustion of an Al-C-AlF3 mixture in nitrogen

Hayk H. Nersisyan, Thanh Nam Huynh, Kyoung Tae Park, Soon-Jik Hong, Jong Hyeon Lee
JOURNAL OF CRYSTAL GROWTH , 560-561 (2021) , 126044

Comparison of physical properties of Ta-Cu-X contact materials with mixing of additives

Developing high-strength ferritic alloys reinforced by combination of hierarchical and laves precipitates

Kanghyun Park, Soon Jik Hong, Sung Ho Song, Sung Hwan Hong, Ki Buem Kim, Junhee Han, Kyoung-Tae Park, Chanho Lee, Peter K. Liaw, Gian Song
JOURNAL OF ALLOYS AND COMPOUNDS , 856 (2021) , 158162

Synthesis, characterization and non-enzymatic lactate sensing performance investigation of mesoporous copper oxide (CuO) using inverse micelle method

Sung Gue Heo, Won-Sik Yang, Sungjin Kim, Young Min Park, Kyoung-Tae Park, Soong Ju Oh, Seok-Jun Seo *
APPLIED SURFACE SCIENCE , 555 , 149638-149642

Laser dissimilar welding of CoCrFeMnNi-high entropy alloy and duplex stainless steel

Nana Kwabena Adomako, Giseung Shin, Nokeun Park, Kyoungtae Park, Jeoung Han Kim
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY , 85 (2021) , 95-105

X-ray Diffraction Computed Nanotomography Applied to Solve the Structure of Hierarchically Phase-Separated Metallic Glass

Mihai Stoica*, Baran Sarac, Florian Spieckermann, Jonathan Wright, Christoph Gammer, Junhee Han, Petre F Gostin, Jürgen Eckert, Jörg F Löffler
ACS nano , 15 , 2

Developing high-strength ferritic alloys reinforced by combination of hierarchical and laves precipitates

Kanghyun Park, Soon Jik Hong, Sung Ho Song, Sung Hwan Hong, Ki Buem Kim, Junhee Han, Kyoung-Tae Park, Chanho Lee, Peter K Liaw, Gian Song*
Journal of Alloys and Compounds , 856 , 158162

Ultra-high strength Co–Ta–B bulk metallic glasses: Glass formation, thermal stability and crystallization

Ju Wang, Ivan Kaban*, Volodymyr Levytskyi, Ran Li, Junhee Han, Mihai Stoica, Roman Gumeniuk, Kornelius Nielsch
Journal of Alloys and Compounds , 860 , 158398

Development of Precipitation-Strengthened Al0.8NbTiVM (M = Co, Ni) Light-Weight Refractory High-Entropy Alloys

Kangjin Lee, Yunjong Jung, Junhee Han, Sung Hwan Hong, Ki Buem Kim, Peter K Liaw, Chanho Lee*, Gian Song*
Materials , 14 , 8

Development of coherent-precipitate-hardened high-entropy alloys with hierarchical NiAl/Ni2TiAl precipitates in CrMnFeCoNiAlxTiy alloys

Jongtae Kim, Soon Jik Hong, Jin Kyu Lee, Ki Buem Kim, Jong Hyeon Lee, Junhee Han, Chanho Lee*, Gian Song*
Materials Science and Engineering: A , 823 , 141763

Compositional complexity dependence of lattice distortion in FeNiCoCrMn high entropy alloy system

P Thirathipviwat*, S Sato, G Song, J Bednarcik, K Nielsch, J Han*
Materials Science and Engineering: A , 823 , 141775

Investigation of phase-transformation path in TiZrHf (VNbTa) x refractory high-entropy alloys and its effect on mechanical property

Yunjong Jung, Kangjin Lee, Soon Jik Hong, Jin Kyu Lee, Junhee Han, Ki Buem Kim, Peter K Liaw, Chanho Lee*, Gian Song*
Journal of Alloys and Compounds , 886 , 161187

지역 순환풍 발생 특성 이해를 통한 국내 주요항만 발생 대기오염물질의 항구도시 영향 범위 분석 -여름철 해륙풍 모사를 중심으로-

권용범, 조인희
해양환경안전학회지 , Vol.27 No.6 (2021.10) , pp.721-730

Optimization of a Solution Treatment in the Al-Cu-Mg-Ag Alloy via a Microstructural Investigation

Hyeongsub So, Jae-Hong Shin, Leeseung Kang, Chanuk Jeong, Kyou-Hyun Kim
Metals , 12 , 66

Influence of Sc Microalloying on the Microstructure of Al5083 Alloy and Its Strengthening Effect

Ji-Hoon Park, Kee-Ahn Lee, Sung-Jae Won, Yong-Bum Kwon and Kyou-Hyun Kim
metals , 11 , 1120

Natural Aging Effect of Al-20Zn-3Cu Alloy on Mechanical Properties and Its Relation to Microstructural Change

Min-Jung Park, Hyeongsub So, Kyou-Hyun Kim, Jai-Won Byeon and Leeseung Kang
metals , 11(9) , 1485

The relation between mechanical properties and microstructural evolution induced by Sc microalloying in Al-20Zn-3Cu alloy

Min-Jung Park, Hyeongsub So, Leeseung Kang, Jai-Won Byeon, Kyou-Hyun Kim
Journal of Alloys and Compounds , Volume 889 , 161719

Development of a high-strength Al-Zn-Mg-Cu-based alloy via multi-strengthening mechanisms

Sung-Jae Won, Hyeongsub So, Leeseung Kang, Soong Ju Oh, Kyou-Hyun Kim
Scripta Materialia , Volume 205 , 114216

Mechanical properties and microstructural evolution in Al–Cu–Mg–Ag alloy with a CuxMgx/10 content

Hyeongsub So, Sung-Jae Won, Jihoon Park, Soong Ju Oh, Leeseung Kang , Kyou-Hyun Kim
Materials Science and Engineering: A , Volume 824 , 141573

Sensitivity of quantitative symmetry measurement algorithms for convergent beam electron diffraction technique

Hyeongsub So, Ro Woon Lee, Sung Taek Hong & Kyou-Hyun Kim
Applied Microscopy , Volume 51 , article number 10

An in-situ approach for fabricating network reinforced CoCrFeNi matrix composite

Muhammad Aneeq Haq, Yoseb Song, Hansaem Lee, Muhammad Waqas Khalid, Da-Woon Jeong, Kee-Ryung Park, Bum Sung Kim
Materials Science and Engineering: A , 818 , 141405

Thickness control of TiN network in CoCrFeNi matrix composite with tunable microstructure

Muhammad Aneeq Haq, Hansaem Lee, Yoseb Song, Da-Woon Jeong, Bum Sung Kim
Applied Surface Science , 543 , 148761

Characteristics of highly sensitive and selective nitric oxide gas sensors using defect-functionalized single-walled carbon nanotubes at room temperature

Da-Woon Jeong†, Kyeong Heon Kim†, Bum Sung Kim, Young Tae Byun*
Applied Surface Science , 550 , 149250

Review on Characterization Method and Recent Research Trend about Metal Powder for Powder Bed Fusion (PBF) Process

Bin Lee , Dae-Kyeom Kim , Kim Young Il , Do Hun Kim , Yong Son , Kyoung Tae Park , Taek-Soo Kim
한국분말야금학회지 , 27 , 509-519

Optimization of Metal Powder Particle Size Distribution for Powder Bed Fusion Process via Simulation

Hwaseon Lee , Dae-Kyeom Kim , Kim Young Il , Jieun Nam, Yong Son , Taek-Soo Kim, Bin Lee*
한국분말야금학회지 , 27 , 44-51

Synergetic strengthening of additively manufactured (CoCrFeMnNi)99C1 high-entropy alloy by heterogeneous anisotropic microstructure

Jeong Min Park , Jungho Choe , Hyung Keun Park , Sujung Son , Jaimyun Jung , Taek-Soo Kim , Ji-Hun Yu , Jung Gi Kim , Hyoung Seop Kim*
Additive Manufacturing , 35 , 101333

GAS ATOMIZATION PARAMETRIC STUDY ON THE VIGA-CC BASED SYNTHESIS OF TITANIUM POWDER

Kim, Dae-Kyeom; Kim, Young Il; Lee, Hwaseon; Kim, Young Do*; Lee, Dongju; Lee, Bin; Kim, Taek-Soo
ARCHIVES OF METALLURGY AND MATERIALS , 65 , 997-1000

Effect of Temperature on the Plastic Deformability of Gas Atomized NdFeB Anisotropic Magnets

Cho Ju-Young , Choa Yong-Ho , Nam Sun-Woo , Rasheed Mohammad Zarar , Kim Taek-Soo*
Archives of Metallurgy and Materials , 65 , 1293-1296

EFFECT OF Mg RATIO ON THE EXTRACTION OF Dy FROM (Nd,Dy)-Fe-B PERMANENT MAGNET USING LIQUID Mg

SANGMIN PARK, SUN-WOO NAM, JU-YOUNG CHO1, SANG-HOON LEE, SEUNG-KEUN HYUN, TAEK-SOO KIM*
Archives of Metallurgy and Materials , 65 , 1281-1285

CONTROL OF Nd-Fe-B MORPHOLOGY AS FUNCTION OF THE PVP CONCENTRATION USING ELECTROSPINNING PROCESS

NU SI A EOM, MUHAMMAD ANEEQ HAQ, JIMIN LEE, KYOUNG-MOOK LIM, TAEK SOO KIM, YONG-HO CHOA, BUM SUNG KIM*
Archives of Metallurgy and Materials , 65 , 993-996

Powder interface modification for synthesis of core-shell structured CoCrFeNiTi high entropy alloy composite

Muhammad Aneeq Haq , Nu Si A. Eom , Noh Su , Hansaem Lee b, Taek Soo Kim , Bum Sung Kim*
Applied Surface Science , 506 , 144925

Magnetic properties of M-type strontium ferrites with different heat treatment conditions

Namji Oh, Seungyeon Park, Yongwan Kim, Hyukmin Kwon, Sangsub Kim & Kyoungmook Lim
RARE METALS , 39 , 84-88

Fabrication and characterization of 1-dimensional neodymium-iron-boron fibers using new reduction-diffusion process

Nu Si A Eom, Eun Ju Jeon, Muhammad Aneeq Haq, Jimin Lee, Yong-Ho Choa, Bum Sung Kim
Materials Letters , 268 , 127611

Synthesis of one-dimensional neodymium-iron-boron-oxides

Eun Ju Jeon, Nu Si A Eom, Yong-Ho Choa, Bum Sung Kim
Materials Letters , 264 , 127286

CONTROL OF Nd-Fe-B MORPHOLOGY AS FUNCTION OF THE PVP CONCENTRATION USING ELECTROSPINNING PROCESS

Nu Si A Eom, Muhammad Aneeq Haq, Jimin Lee, Kyoung Mook Lim, Taek-Soo Kim, Yong-Ho Choa, Bum Sung Kim
Archives of Metallurgy and Materials , 65 , 993-996

Powder interface modification for synthesis of core-shell structured CoCrFeNiTi high entropy alloy composite

Muhammad Aneeq Haq, Nu Si A. Eom , Noh Su, Hansaem Lee, Taek Soo Kim, Bum Sung Kim
Applied Surface Science , 506 , 144925